P14 -- Mikrotik EOIP Tunnel

Let us assume we want to bridge two networks: 'Office LAN' and 'Remote LAN'. By using EoIP setup can be made so that Office and Remote LANs are in the same Layer2 broadcast domain.

Diagram:


At first we create EoIP tunnel on our gateway ...

Code: [Select]

[admin@Our_GW] interface eoip> add name="eoip-remote" tunnel-id=0 \
\... remote-address=10.0.0.2
[admin@Our_GW] interface eoip> enable eoip-remote
[admin@Our_GW] interface eoip> print
Flags: X - disabled, R - running
  0    name=eoip-remote mtu=1500 arp=enabled remote-address=10.0.0.2 tunnel-id=0
[admin@Our_GW] interface eoip>

and on Remote router

Code: [Select]

[admin@Remote] interface eoip> add name="eoip" tunnel-id=0 \
\... remote-address=10.0.0.1
[admin@Remote] interface eoip> enable eoip-main
[admin@Remote] interface eoip> print
Flags: X - disabled, R - running
  0   name=eoip mtu=1500 arp=enabled remote-address=10.0.0.1 tunnel-id=0

[admin@Remote] interface eoip>

Next step is to bridge local interfaces with EoIP tunnel On Our GW ...

Code: [Select]

[admin@Our_GW] interface bridge> add 
[admin@Our_GW] interface bridge> print
Flags: X - disabled, R - running
 0  R name="bridge1" mtu=1500 arp=enabled mac-address=00:00:00:00:00:00 
      protocol-mode=none priority=0x8000 auto-mac=yes 
      admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s 
      transmit-hold-count=6 ageing-time=5m 
[admin@Our_GW] interface bridge> port add bridge=bridge1 interface=eoip-remote
[admin@Our_GW] interface bridge> port add bridge=bridge1 interface=office-eth
[admin@Our_GW] interface bridge> port print
Flags: X - disabled, I - inactive, D - dynamic
 #    INTERFACE      BRIDGE  PRIORITY PATH-COST
 0    eoip-remote    bridge1 128      10
 1    office-eth     bridge1 128      10
[admin@Our_GW] interface bridge>

... and Remote router:

Code: [Select]

[admin@Remote] interface bridge> add 
[admin@Remote] interface bridge> print
Flags: X - disabled, R - running
 0  R name="bridge1" mtu=1500 arp=enabled mac-address=00:00:00:00:00:00 
      protocol-mode=none priority=0x8000 auto-mac=yes 
      admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s 
      transmit-hold-count=6 ageing-time=5m 
[admin@Remote] interface bridge> port add bridge=bridge1 interface=ether
[admin@Remote] interface bridge> port add bridge=bridge1 interface=eoip-main
[admin@Remote] interface bridge> port print
Flags: X - disabled, I - inactive, D - dynamic
 #    INTERFACE      BRIDGE  PRIORITY PATH-COST
 0    ether          bridge1 128      10
 1    eoip-main      bridge1 128      10     
[admin@Remote] interface bridge>

Now both sites are in the same Layer2 broadcast domain. You can set up IP addresses from the same network on both sites.